Introducing the Flashing Buzzer, complete with five fabulous Bullshit sound effects and a light that will make your ears tingle. It’s as easy as pressing a The Official BS Button! With dimensions that will make your average gossip jealous (7.5cm in diameter and 5.5cm tall), this little beauty runs on two AAA batteries that are already included.
And guess what? It’s suitable for ages three and up, so even your little ones can join in on the fun. Plus, we’ve thrown in some sticky tape velcro fastener for all your fixing needs. But the best part? This giant red button will speak the truth for you, so you can call out all the Bullsh*t without uttering a single word.
What about The Official BS Button?
- Flashing buzzer with 5 different sound effects and light
- Dimensions: Diameter: 7.5cm, Height: 5.5cm
- Requires 2 AAA batteries (included)
- Recommended for ages 3 and up
- Comes with a sticky tape velcro fastener for fixing
- Giant red button makes a hilarious statement
- Perfect for calling out Bullsh*t without speaking
Karen –
Bought as a gift, think the batteries needed replacing after a couple of hours!
Brian –
Fun item
Hannah 15 –
I got this for my little brother’s b day. He’s turning 22 and loves being sarcastic and playing the BS card game so he was stoked when i gave this to him! My only complaint is i wish it had more sayings on it but i think it does have around 6 so that complaint is minor. It’s smaller than i thought but all around a great gift. I would buy again.
Steve –
Funny
Kindle Customer –
Use this at my desk in the office! Great when people thing it doesn’t work 😂
Craft love –
I bought it as a gift he loved it would recommend
Bianka Illyes –
Such a fun gag gift! Fun for many ages!
eternalgreenknight –
This toy was very educational- it got me thinking, and inspired creativity.
This button is AMAZING! My boss has an easy button, so of course I had to get one too… because I’m just that kind of employee…lol… riiiiight. I wondered if I could swap the guts of an easy button with a BS button… so I ordered both on Amazon, and had some fun doing a little creative soldering, trimming of internal plastic (under “easy”), and use of a rubber band to hold the pressure button from the easy button in place on the BS button after soldering the wires (see below for walk-through).
A switcheroo when he was out of his office, and presto: an innocuous looking button that lets out a random phrase letting you know what it REALLY was (hint: not easy)! That was easy.
DISCLAIMER: I work in an agency with a “high ops-tempo” and difficult cases where “everything is a crisis,” and most importantly, a boss who gets my sense of humor. Try this at your own risk.
——
Remove feet from easy button, set aside (don’t lose), sticky side up.
Separate halves of buttons, and carefully remove wires from easy button board (leaving them on the battery pack and speaker for ease), and BS button board.
Wire Connections:
Easy Button
black-VSS
white- VDD
Red- Speakers
BS Button
Black- GND
Red- VCC
White- Speakers
I recommend soldering to the back of the BS board (just find the appropriate spot and solder- it beats trying to jam wires into the board- good luck with that)
Your red wires become speaker wires, so solder those to their proper spot on the BS button.
Blk stays blk, so just solder that wire to the GND spot.
The white wire goes to where the red used to go, so solder that to the VCC spot.
You left the yellow and blue wires dangling from the LED on the BS button shell, so don’t worry about those. They don’t get used.
Loosely screw your Frankenstein’s Monster’s Trojan Button’s guts down in one spot using an existing screw hole- button side down. Leave room to slide the metal plate back in place (it’s makes a pop/click noise when you press the button, and is necessary for a convincing transformation).
Now would be a good time to affix the pressure switch (the rubber button from the top of the easy button). It will work on the BS button board to complete the circuit. I used a rubber band to hold the pressure switch in place (loop it around the middle of the board from one side of the switch, and back over the switch to hold it down).
On the back of the easy button’s red shell there are four posts. You’ll have to clip them almost all the way down. If you’ve tried to screw it down before now (impatient, aren’t we), you’ll have noticed that it doesn’t fit. Keep clipping until it fits snugly over the top and you can slide the metal plate back under the guts so when it’s all assembled the pressure pushes the guts down onto the pressure switch and clicks the plate at the same time). Screw it back together, and replace the feet.
Let the fun begin!
Jared –
The phrases could be a bit better dare I say cringe, but fits as a nice collectible item.
Madi Coakley –
Got this for a friend as a birthday gift. It was a hit! He has it in his office 🤣. It definitely can be heard so there’s no using it discreetly.
NT –
Came well packaged, I must say this is one of my favourite items I have ever bought.
It has different voices on the button, the best thing is that when I use the button everyone laughs and it’s great putting a smile 😊 on their face as well as yours.
Buy it u will not be disappointed.
Jan –
Mittlerweile ein fester Bestandteil unseres Büroinventars und regelmäßig für Lacher in der Manschaft / bei Kunden gut.
Preis muss man mögen, da es dafür relativ billig ausgeführte Plastik gibt. Gefühlt sind 50% des Preises durch den Haben-Wollen-Effekt zu begründen. Ist halt ein lustiges Gadget….und lachen ist gesund….und Gesundheit ist durch nichts zu bezahlen…
von daher passt es dann am Ende schon
Unbekannt –
Witziges Geburtstagsgeschenk für Freunde, kam gut an!